I. Product Overview LCPM Series pulse dust collector is my factory developed the outcome of the product. By the Ministry of Science and Technology Achievement Award, and won the 2093 National Environmental Protection Agency to pay the best practical technology products to promote the project. Dust processing capacity to meet more users demand high concentrations, off the hospital adopted by the school, all technical cooperation successfully developed proprietary technology products. Second, product characteristics: flue dust through the filter material, dust particles are filtered off, trapping coarse dust filter material depends mainly on the inertia collision, trapping fine dust mainly by diffusion and sieving effect. Third, the technical parameters: Model Technical parameters LCPM- GS32-3 LCPM- GS32-4 LCPM- GS32-5 LCPM- GS32-5 air volume (m3 / h) 6900 8930 11160 13390 total filtration area (m2) 93 124 155 186 Net Filter area (m2) 62 93 124 155 dust collector chamber (unit) 3456 total bag (a) 96 128 160 192 imported gas dust concentration (g / Nm3) <200 export gas dust concentration (g / Nm3) <0.1 insulation area (m2) 26.5 34 41 48.5 Total weight (not including the stratosphere) (kg) 2900 3900 4900 5900 Note: 1, the amount of wind in the table is based filtering 1.2m / min calculated Please refer to the actual selection of the recommended list. 2, the device resistance 1200-1600Pa. 3, in the table refers to the net filter area filter area when cleaning a room; the table refers to the case of the factory air consumption centralized gas supply, such as set up a separate air compressor, gas consumption in the table to be multiplied by 1.3 coefficient . 4, cleaning air supply pressure of (5-7) × 105 Pa. 5, the dust collector to withstand negative pressure 5000Pa.